TMDSDOCK28379D: Eagle CAD files

sean haliburton

Part Number: TMDSDOCK28379D
Other Parts Discussed in Thread: CONTROLSUITE, C2000WARE

I'm wondering if there are any existing CAD files I can use? I wasn't able to find anything on the product page (www.ti.com/.../TMDSDOCK28379D

If there are no existing CAD files, alternatively I would need the pinout definitions and board dimensions to create my own part.

Thank you

over 8 years ago

0 Ken Schachter over 8 years ago

TI__Genius 17315 points

Sean,

Please see C2000Ware and look under the "boards" folder, or controlSUITE and look under the "development_kits" folder. I hope this helps. If this answers your question, please click the green "Verified Answer" button. Thanks.

- Ken

0 sean haliburton over 8 years ago in reply to Ken Schachter

Prodigy 90 points

I believe I have found the relevant files, however I am unable to open the ones without errors. There is a .sch and a .pcb file that I have tried opening using both Eagle and KiCAD, but neither work.

Any idea what program I can use to open these files?

0 Mark Labbato over 8 years ago in reply to sean haliburton

Guru 30330 points

Sean,

Both the docking station and the controlCard were created using PADS (www.mentor.com/.../pads)

There is a free viewer available that you can use to view the design files. I think you can make measurements and such.

Thanks,
Mark

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSDOCK28379D: Eagle CAD files