CCS/TMS320F28379D: TMS320F28379D

KDN Nandu

Intellectual 750 points

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

Do TMS320F28379D come with boot loader?

over 8 years ago

0 Hareesh Janakiraman over 8 years ago

TI__Guru* 95315 points

Nandu,
As shown in multiple places in the datasheet (SPRS880H), this device has a boot-ROM with bootloader option for multiple peripherals. There is an entire chapter in the TRM about the boot-ROM.

0 KDN Nandu over 8 years ago in reply to Hareesh Janakiraman

Intellectual 750 points

I want to develop my own board using TMS320F28069MPZT, Can you please help me how can I program it using USB.

Do I have to use USB to JTAG, do I need firmware for it?

0 Hareesh Janakiraman over 8 years ago in reply to KDN Nandu

TI__Guru* 95315 points

The subject line of your post says "TMS320F28379D", but the body says "TMS320F28069MPZT". Please clarify which device you are interested in.

0 Hareesh Janakiraman over 8 years ago in reply to Hareesh Janakiraman

TI__Guru* 95315 points

For now, I’ll assume you are interested in TMS320F28069MPZT. This device has no USB option in the bootloader. However, there is a USB flash bootloader and flash app example that can be used for this. There is also a host tool. Download C2000ware from www.ti.com and check the following directories:

C:\ti\c2000\C2000Ware_1_00_03_00\utilities\tools\f2806x\dfuprog

C:\ti\c2000\C2000Ware_1_00_03_00\utilities\tools\f2806x\tidfu

C:\ti\c2000\C2000Ware_1_00_03_00\device_support\f2806x\MWare\boot_loader

C:\ti\c2000\C2000Ware_1_00_03_00\device_support\f2806x\examples\c28\bl_app

Start off by downloading SPRABV4B from the TI website. This gives a good overview of the flash programming process leveraging the bootloaders.

0 KDN Nandu over 8 years ago in reply to Hareesh Janakiraman

Intellectual 750 points

Dear Sir,

Thanks for reverting, this is little bit complicated I need quick solution, My code is ready on TMS320F28069MPZT development board, I need to add some circuitry in present board and send it for testing, is their any quick solution for it.

Can I use JTAG?