• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 918 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28027: C2000 Breakout Board Pinout Dimensions

John Brothers
Prodigy 10 points

Part Number: LAUNCHXL-F28027
Other Parts Discussed in Thread: CONTROLSUITE

I have been looking all over to find the dimensions of the C2000 breakout board for the F28027 MCU.  I want to directly plug a PCB I am designing into my C2000, but I cannot find anywhere the dimensions for how far away the pin arrays should be. 

I use Altium, so if some files exists for Altium it would be very helpful. 

I would also be happy with a detailed drawing of the dimensions.  

Thanks in advance!

  • 0
    TI__Guru 57255 points

    Hi John,

    It's not clear which 'breakout board' you are referring to. 

    The F28027 LaunchPad and its connectors?  The controlCARD Docking Station baseboard and its connectors?  Other?

    ===

    The LaunchPad was done in Eagle (and this can likely import into Altium, where you can then find out dimensions).  Details can be found within controlSUITE at:
    \controlSUITE\development_kits\C2000_LaunchPad\LAUNCHXL-F28027\HwDevPkg\

    The Docking Station was done in the freeware ExpressPCB.  I'd recommend installing that tool and getting dimensions from within the tool.  Details can be found within controlSUITE at:
    \controlSUITE\development_kits\~ExperimentersKits\DIM100ExperimentersKit-HWdevPkg_v2_0\R3\


    Thank you,
    Brett