• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 85 subscribers
  • Views 987 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-1003: Where are software files to download for this design?

Vlad Blanshey
Intellectual 770 points
Part Number: TIDM-1003
Other Parts Discussed in Thread: MOTORWARE

TIDM-1003 reference design guide walks user through installation of the software design files into Motorware to make TIDM-1003 project available for CCS  but the software download on TI website for this design is greyed out - not available.

Then how to make CCS project for this design to debug?

  • 0
    TI__Genius 17315 points
    Vlad,

    I just tried it and was able to download the software. Click the following link:

    www.ti.com/.../Motorware

    Then on this web page in the "Order Now" section click "Download" in the RED box. Next, complete the "TI Software Approval" form (must be completely filled out) and then click "Submit". At this point, you should be able to download the software.

    Please let me know if this solves your problem. Also, please use the green "Verified Answer" button if it is now working.

    - Ken
  • 0 in reply to Ken Schachter
    Intellectual 770 points
    Motorware does not have software files needed for this reference design. They suppose to be added manually to the Motorware after been downloaded as a part of design files from www.ti.com/.../tidm-1003
    but under the "Software files" there is only "TIDM-1003 Low Voltage 50A Sensorless-FOC for BLDC Motor Reference Design" , not the software, that's why I posted this question
  • 0 in reply to Vlad Blanshey
    TI__Guru** 115420 points
    You can find the software package in below link, and then follow the steps in the design guide to add the code into motorwWare.

    www.ti.com/.../TIDM-1003

    TIDM-1003 Low Voltage 50A Sensorless-FOC for BLDC Motor Reference Design
    (ZIP, 34587KB) 21 Aug 2017
  • 0 in reply to Yanming Luo
    TI__Genius 17175 points
    Just a heads up, it appears the link that Yanming mentioned might download as an extension-less file; if so, just add ".zip" on the end to correctly label it a zip archive. Once unzipped, you'll find the correct TIDM-1003 software in the directories within

    Sean
  • 0 in reply to Yanming Luo
    Intellectual 770 points
    Your both links provided are the same as mine in the prior post - the problem was that I did not see there any downloadable software for the design. The only link in the section "Software" is "TIDM-1003 Low Voltage 50A Sensorless-FOC for BLDC Motor Reference Design" document which according to the title suppose to be a reference design manual for Sensorless-FOC ... although I already have that manual downloaded but decided to try it again......... and what a surprise, it is zip of software !
    I was confused because the title of the file is wrong - it is the same as another manual describing workings of FOC, instead it had to be titled as a software for this design.
  • 0 in reply to Yanming Luo
    Intellectual 770 points
    Your pointing yet again to the same site helped me to find what is wrong. Thank you Yanming