CCS/TMS320F28377S: C2000

Yuva raj

Part Number: TMS320F28377S
Other Parts Discussed in Thread: CONTROLSUITE,

Tool/software: Code Composer Studio

Hi All,

I am using TMS320F28377S for my project, I tried with Controlsuite example program, Program build with no error and warnings.

While i am put breakpoint for debug purpose screen shows error like below

Regards,

Yuvaraj

over 7 years ago

0 Gautam Iyer over 7 years ago

Guru 192875 points

Hi,

It seems as if your controller is not powered. Please check the 3.3V and 1.8V rails.

Regards,
Gautam

0 Yuva raj over 7 years ago in reply to Gautam Iyer

Expert 1045 points

Hi Gautam,

I am connected launch pad through USB port, Whenever debug mode started IDE erase the flash and load the program into controller after that i am able to run the program.

My issue is during running when i am halt(Pause) or put break point the issue will appear.

Yuvarj

0 Yuva raj over 7 years ago in reply to Yuva raj

Expert 1045 points

Thanks,
I am resolved the issue.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28377S: C2000