TMS320F28377D: Uniflash422: "Run Target after program load" to remember

Hideaki Nambu

>>
The previous thread:
TMS320F28377D: Uniflash421: Settings & Utilities: C28xx_CPU2: Calculate Checksum >>> Error.
<<

Hello,

Thank you for your post on 2017/11/23 3:48 AM in the thread above.

Can I ask the status of requesting the "Remember my settings" feature for 'Uncheck'ing the setting for "Run Target after program load" ?

over 8 years ago

0 Vamsi Gudivada over 8 years ago

TI__Guru* 87155 points

Hideaki-san,

As promised earlier, we prioritized checksum for this quarter and released. Thank you for confirming that it worked for you (in the post that you referred).

Regarding the "Remember my settings" feature for 'Uncheck'ing the setting for "Run Target after program load": I filed a ticket earlier and will be implemented in mid-2018. Hope this is Ok.

Thanks and regards,
Vamsi

0 Hideaki Nambu over 8 years ago in reply to Vamsi Gudivada

Mastermind 9165 points

Vamsi,
Thank you. We are looking forward to the implementation.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28377D: Uniflash422: "Run Target after program load" to remember