CCS: F28377s

yasser hamed

Tool/software: Code Composer Studio

how to avoid floating period of GPIOs at F28377s? when powering up the kit its gpios made to high unexpectedly, operate some outputs and it resets itself again. it affect my system

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 473971 points

Hello,
This question is best answered by the device experts in the C2000 forum. I will move this thread there

Thanks
ki

0 yasser hamed over 7 years ago in reply to Ki

Prodigy 40 points

Ok, Thanks.

0 Kris Parrent over 7 years ago in reply to yasser hamed

TI__Genius 15260 points

Hi Yasser Hamed,

Please refer to the table in the datasheet Pins With Internal Pullup and Pulldown for further information on how pins behave during boot. In general, most pins are not driven during boot.

Regards,
Kris

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS: F28377s