TMS320F28335: SciCommsGui.c

dinesh dhiman

Prodigy 165 points

Part Number: TMS320F28335

Dear Sir,

Can you please support me about the protocol used in "SciCommsGui.c"

I am working on a UPS project and need to monitor and tune some PID coefficients.

Thanks

Dinesh Dhiman

over 8 years ago

0 Manish Bhardwaj over 8 years ago

TI__Mastermind 43730 points

You can look at this

e2e.ti.com/.../2428554

that's all I have, I myself don't understand it more than this. I will forward it to a colleague who might have more information

0 Brett Larimore over 8 years ago in reply to Manish Bhardwaj

TI__Guru 57255 points

Hi,

I might also recommend referring to the following thread:
https://e2e.ti.com/support/microcontrollers/c2000/f/171/p/323334/1127678#1127678

Thank you,
Brett

0 dinesh dhiman over 8 years ago in reply to Brett Larimore

Prodigy 165 points

Thanks all

i am trying to understand the protocol as per documents and information provided by manish and Brett.

0 dinesh dhiman over 8 years ago in reply to Manish Bhardwaj

Prodigy 165 points

Dear Manish Thanks for support

now i am working on SOLARHV_DCAC kit i am able to run GUI during debug in CCS. But when i run my my device in standalone mode

the device seems working fine LD2 blink@1sec. But Gui cant communicate, what is the reason behind this and how to run the GUI without debug.

i am using CC28035 isolated card on dimm100. The debugger is XDS100v2(I Think).

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28335: SciCommsGui.c