CCS/TMDSDOCK28335: TMDSDOCK28335

Fadoul Souleyman

Part Number: TMDSDOCK28335

Tool/software: Code Composer Studio

I’m configurating an ePWM for DSP F28335 to control a 5 five level single phase inverter. I cannot find a clear example to help me for the configuration. I sent you my simulink file, please advice what to do?.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/171/Five_5F00_Level_5F00_converter.7z

Fadoul

over 7 years ago

0 Brian McKay over 7 years ago

Mastermind 9005 points

Hi Fadoul,

MathWorks has a a couple examples that are included with our Simscape Power Systems product that may help.

Doc links (Login may be required):

I found these examples via a search in our documentation. I would expect that you can use MathWorks C2000 Support Package to run the control algorithms from these models on your F28335.

I'm not familiar at all with these examples, so if you need additional help, please contact MathWorks Technical Support.

Cheers,

-Brian

0 Fadoul Souleyman over 7 years ago in reply to Brian McKay

Prodigy 115 points

Thank you for replying,
My question is concerning the ePWM of Texas instrument. How to configurate it for the multilevel converter? Mathorks sent me back to Texas instrument.
Thanks
Fadoul

0 Chen Jiang ti over 7 years ago in reply to Fadoul Souleyman

TI__Genius 15935 points

Hi Fadoul,

As Manish mentioned in the thread below, we do not have five level converter example.
e2e.ti.com/.../2487896

Can you explain what you have done in your simulink file and be more specific about your problem? Right now I only have the same suggestions as Manish said in the thread which is to take the three level converter as a starting point.

Best regards,
Chen

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMDSDOCK28335: TMDSDOCK28335