CCS/TMS320F28335: Boost Converter closed loop control with CCS coding (NOT using MATLAB)

Soumya Ranjan Meher

Part Number: TMS320F28335
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

I am trying to run the Boost converter with closed loop control, but NOT with the MATLAB. I will implement this using codes. So, If anyone has knowledge in this using Codes, Please reply.

Thank you in advance.

over 7 years ago

0 Chen Jiang ti over 7 years ago

TI__Genius 15935 points

Hi Soumya,

Could you please tell us the problem you encountered? Thanks.

Regards,
Chen

0 Soumya Ranjan Meher over 7 years ago in reply to Chen Jiang ti

Intellectual 590 points

I am a beginner for CCS as well as TMS320F28335. I have done the simulation in MTALAB Simulink for Closed loop voltage control of Boost converter. But How to proceed for CCS codes while implementing it in hardware. Like First I have to do the ADC part then comparator, Compensator etc.
Please provide me the link of the thread (If it is discussed earlier) for step wise procedure to run any closed control topology (in CCS coding)

0 Chen Jiang ti over 7 years ago in reply to Soumya Ranjan Meher

TI__Genius 15935 points

Hi Soumya,

I would suggest you to take a look at several links below which provide you some basic understanding of the digital control system based on C2000:
www.ti.com/.../sprabu2.pdf
www.ti.com/.../sprabu4.pdf

Also there are several sample projects in controlSUITE and digital power sdk which you can use as the reference code.
For example: www.ti.com/.../BOOSTXL-BUCKCONV

Regards,
Chen

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28335: Boost Converter closed loop control with CCS coding (NOT using MATLAB)