• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 404 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F28377S: CLA Problem

Szy Sob
Intellectual 330 points
Part Number: TMS320F28377S


Tool/software: Code Composer Studio

Hi

I have a problem with CLA. When I debug  an example "cla_atan"or any other CLA example, the CLA and programm doesn't work. I added screen with error.

Thank you for help

Best regards

Szymon

  • 0
    TI__Mastermind 32995 points
    Hi,

    I am not sure what you mean by it doesn't work...

    The CLA is halted on the MDEBUGSTOP instruction. You can see more information on this in the TRM.

    If you disconnect the CLA and then debugger reset and restart and run the C28x, the C28x should complete and show passing results from the CLA.

    Regards,
    sal