CCS/TMS320F28379D: Beginner. Looking for basics to learn.

Aditya Deo

Part Number: TMS320F28379D

Tool/software: Code Composer Studio

Hello!

One of the parts of my project involves analyzing a sinewave input using an ADC. I am completely new to Microprocessors and to the Code Composer Studio. I am completely clueless about how to start. My input is a sine wave of 50Hz. I have to sample it using an ADC then window the samples, take FFT and then pass it through a DAC. I have no idea how to begin. Please guide me to some place where I could learn the basics of the software and my board. Any and all help is appreciated. Thank you!

over 7 years ago

0 Krishna Allam over 7 years ago

TI__Expert 7985 points

Hi Aditya,
You might find this training quite helpful:
processors.wiki.ti.com/.../C2000_Multi-Day_Workshop
Let us know if you have other questions.
Cheers!
Krishna

0 Krishna Allam over 7 years ago in reply to Krishna Allam

TI__Expert 7985 points

Hi Aditya,
Have successfully resolved the issues you were seeing? Please advise...
Cheers!
Krishna

0 Aditya Deo over 7 years ago in reply to Krishna Allam

Prodigy 30 points

Yes sir. I did find the info useful. However as I try to run a simple LED blink program, it worked for first instance but then I have not been able to make it work. The error I am encountering is:

C28xx_CPU1: If erase/program (E/P) operation is being done on one core, the other core should not execute from shared-RAM (SR) as they are used for the E/P code. Also, CPU1 will be halted to determine SR ownership for the CPU which will run the Flash Plugin code, after which CPU1 will be set to run its application. User code execution from SR could commence after both flash banks are programmed.

Where am I going wrong?

Thank you!

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28379D: Beginner. Looking for basics to learn.