Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 288 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28069: USB related testing codes for IEC60730

Linda Zhang84708
Expert 5615 points
Part Number: TMS320F28069

Hello Champs,

 

As downloaded from below link for C2000 IEC60730 software package, USB related testing codes cannot be founded in it.

Would you please kindly suggest whether we have plan to add USB related code into it or not? Thanks! 

http://www.ti.com/tool/iec60730swpackages

Best Regards,

Linda

  • 0
    TI__Mastermind 32995 points
    We do not plan to add diagnostic SW for the USB.

    However, IEC 60730 Class see only requires that a CRC be sent along with the data packet to meet the safety standard. This is inherent to the USB communication protocol. Therefore, there should not be any additional diagnostic mechanism required for USB.

    Regards,
    sal