how to modify cmd from ram to flash

user5269312

Other Parts Discussed in Thread: CONTROLSUITE, C2000WARE

I have already run program in ram with F28335 , it works fine, now I need to program in flash, I don't know how to modify CMD file ?

over 7 years ago

0 Hakan B over 7 years ago

Expert 1100 points

You can use a prepared cmd file for flash. It is inside below:

<ControlSuite Directory>\device_support\f2833x\vXXX\DSP2833x_common\cmd\F28335.cmd

or
<C2000Ware Directory>\device_support\f2833x\DSP2833x_common\cmd\F28335.cmd

Regards,
Hakan

0 David M. Alter over 7 years ago

TI__Guru 61235 points

user5269312,

See appnote SPRA958 for assistance.

http://www.ti.com/mcu/docs/litabsmultiplefilelist.tsp?sectionId=96&tabId=1502&literatureNumber=spra958l&docCategoryId=1&familyId=1414

- David

0 Ozino Odharo over 7 years ago

TI__Genius 17673 points

Please take note of the previous responses. Additionally, there are generic linker cmd files available in C2000Ware that can be modified for your application. Let me know if you have any other questions.

Regards,
Ozino

C2000™︎ microcontrollers

C2000 microcontrollers forum

how to modify cmd from ram to flash