CCS/CCSTUDIO-C2000: ADC pins of C2000 28379D

Omkar Kulkarni

Part Number: CCSTUDIO-C2000

Tool/software: Code Composer Studio

Hello,

I am new to programming C2000 F28379D Delfino. To begin with programming I wanted to accept a signal through the ADC pin. Can I get a sample code or some guidelines for the same?

over 7 years ago

0 Ken Schachter over 7 years ago

TI__Genius 17315 points

Omkar,

To get started and to learn more about the F28379D please see the multi-day workshop materials at:

processors.wiki.ti.com/.../C2000_Multi-Day_Workshop

In the module 6 lab exercise you will find a project that uses the ADC input pin for sampling a signal.

Also, you might be interested in the one-day workshop materials at:

processors.wiki.ti.com/.../C2000_One-Day_Workshop

This workshop has been recorded and includes a video.

I hope this helps. If this answers your question, please click the green "Verified Answer" button. Thanks

- Ken

0 Omkar Kulkarni over 7 years ago in reply to Ken Schachter

Prodigy 20 points

Thanks for your response sir.
I went through the one day and multi day workshop. I was able to understand the theory. Through the workshop I wasn't able to get familiar with coding. I am not able to code the MCU according to my requirement. There comes an error even if I change the GPIO pin number.

0 Ken Schachter over 7 years ago in reply to Omkar Kulkarni

TI__Genius 17315 points

Omkar,

Please be more specific with the problem you have:

"I wasn't able to get familiar with coding. I am not able to code the MCU according to my requirement. There comes an error even if I change the GPIO pin number."

Did you get the lab 6 exercise to run before modifying it?

- Ken

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/CCSTUDIO-C2000: ADC pins of C2000 28379D