• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 454 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28069F: Can I use lab01b in drv8301kit_revD for BLDC motor driver ?

Hae Ryong Jung
Expert 2150 points
Part Number: TMS320F28069F
Other Parts Discussed in Thread: DRV8301, MOTORWARE

Dear TI members,

I am working on custom BLDC driver board with drv8301 and lab01b of motorware. I am new to BLDC driver.

I have checked PWM waveform with datalog, as follows.

 

Is it correct PWM waveform for BLDC motor drive ?

Best Regards,

Hae Ryong

  • 0
    TI__Guru** 115650 points
    These waveforms are correct if the datalog pointers are linked to the output of SVGEN or the input of PWMDRV. You might implement the lab01b or lab01c on BLDC, but both labs are just used to test the integrity of the hardware board.