TMS320F28075: Unable to debug using XDS110

Barrett Bryan

Intellectual 1010 points

Part Number: TMS320F28075

My customer is trying to debug our TMS320F28075 using XDS110 debugger. He's receiving the following error in console:

Registers are showing value 0x0BAD:

Any idea what might be the cause of this error?

over 7 years ago

0 MatthewPate over 7 years ago

TI__Guru* 84230 points

Barrett,

I would have the customer take a look at this app note we wrote to help root cause these issues. http://www.ti.com/lit/an/spracf0/spracf0.pdf It has a very straightforward flow chart to help debug issues like this.

If customer still has issues you can post back with the step in the guide they reached which should help us close this in a more timely manner.

Best,

Matthew

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28075: Unable to debug using XDS110