TMS320F28379D: Simulink: "Not enough memory on the target to process the packet: EXT_SELECT_SIGNALS"

Peter Berczi

Prodigy 70 points

Part Number: TMS320F28379D

Hello,

I get the following warning on simulink for a normal motor control software with F28379d board:

"Not enough memory on the target to process the packet: EXT_SELECT_SIGNALS"

What shall I do?

Thanks in advance!
Peter Berczi

over 7 years ago

0 Krishna Allam over 7 years ago

TI__Expert 7985 points

Hi Peter,
We have reached out to our domain expert at Mathworks to help answer your question. Someone will be getting back to you soon. Thanks, Krishna

0 venkatesh chilapur over 7 years ago in reply to Krishna Allam

Mastermind 6460 points

Hi,

Below link are good resource to start with.

https://in.mathworks.com/matlabcentral/answers/388466-how-to-resolve-error-not-enough-memory-on-the-target-to-process-the-packet-while-working-on-ti-c20

https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/417896?External-Mode-over-Serial-Communication

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: Simulink: "Not enough memory on the target to process the packet: EXT_SELECT_SIGNALS"