CCS/TMS320F28027: basic code

Anamika Singh

Intellectual 430 points

Part Number: TMS320F28027
Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

How do we write basic code for entering data into gpio without using struct ? How do we use SFR from scratch?

over 7 years ago

0 Tomasz Kocon over 7 years ago

Guru 26200 points

I hope this two docs would help

www.ti.com/.../spru566m.pdf

www.ti.com/.../spru430f.pdf

0 Gautam Iyer over 7 years ago

Guru 192875 points

Hi Anamika,

If you've a look at C2000ware, you can find both structured as well as driver based approach. I guess, you're looking for driver based one:
C:\ti\c2000\C2000Ware_1_00_05_00\device_support\f2802x\examples\drivers

Regards,
Gautam

0 Rajaravi Krishna Katta over 7 years ago in reply to Gautam Iyer

TI__Expert 6795 points

Hi,

Please look into <C2000Ware>\device_support\f2802x\examples\drivers\gpio_setup for an example code using driver based approach.

Refer to the sceanario -> "Enable an GPIO output on GPIO6&7, set it high"

Thanks,
Katta

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28027: basic code