CCS/TMS320F28027: C2000 launchpad

Amine cheriti

Part Number: TMS320F28027
Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

Hi guys,

So I'm new to c2000's series. I've worked more with the MSP430 series. I recently purchased a C2000 launchpad featuring a TMS320F28027 mcu. My problem is the following : I'm not able to launch a simple program to my C2000 launchpad. Actually code composer does not even connect to the board. It tells my that my configuration is not ok. I tried the config in the picture and nothing worked. I tried to run project with c2000 family and TMS320F28027 family but still nothing.

Does anyone have a solution for that? Thank's a lot !!

over 7 years ago

0 Mark Labbato over 7 years ago

Guru 30330 points

Amine,

Please see the FAQ #3 in http://www.ti.com/lit/spruhh2 at the end of the document. You want to select the XDS100v2 debug probe as the connection and just select the TMS320F28027 from the Board or Device section.

-Mark

0 Amine cheriti over 7 years ago in reply to Mark Labbato

Prodigy 210 points

Many thanks Sir, works like a charm. Is there any I2C example with this board?

0 Mark Labbato over 7 years ago in reply to Amine cheriti

Guru 30330 points

Have you downloaded C2000Ware? there are peripheral examples for the F2802x included in that software package.

-Mark

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28027: C2000 launchpad