• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 523 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F2812: Sending data via USB

Supratim Manna
Intellectual 280 points

Part Number: TMS320F2812
Other Parts Discussed in Thread: C2000WARE

Dear sir/madam,

                          I am using a customize TMS320F2812 development board. I want to send data from the processor using the SCI communication to the PC via USB. Is it possible to do SCI and USB interface using this processor? If yes then what should be the approach ? 

  • 0
    TI__Genius 17315 points
    Supratim,

    SCI communications using the FTDI device (JTAG interface) and USB has been implemented with the Experimenter Kits for our F2833x/F2806x, etc. families. I recommend referring to the documentation for these kits, which can be found at:

    C:\ti\c2000\C2000Ware_<version>\boards\controlCARDS\

    C:\ti\c2000\C2000Ware_<version>\ExperimenterKits\DockingStation_DIM_100pin

    Also, see:

    e2e.ti.com/.../665480

    I hope this helps. If this answers your question, please click the green "Verified Answer" button. Thanks.

    - Ken
  • 0 in reply to Ken Schachter
    TI__Genius 17315 points
    Supratim,

    It's been a while since we have heard from you last. Therefore, we are assuming you were able to resolve your issue. If this isn’t the case, please reject this resolution or reply to this thread. If this thread locks, please make a new thread describing the current status of your issue. Thank you.

    - Ken