PCB Design for DIMM 100 Edge Connector

AndriL

Other Parts Discussed in Thread: C2000WARE

Hello everyone

I want to design some kind of own ControlCard for Lab usage. It should contain a F28069 CPU and some oder Hardware and Interfaces that the available ControlCard doesn't provide. The card should fit in the DIMM 100 Socket on our existing boards. Can anyone provide a PCB Design of the DIMM 100 Edge Connector or a technical drawing of the contacts and cut-outs?

Thank you for your Help

Andri

over 7 years ago

0 Gautam Iyer over 7 years ago

Guru 192875 points

Hi Andri,

Simply download C2000ware and navigate to :
C:\ti\c2000\C2000Ware_1_00_05_00\boards\ExperimenterKits\DockingStation_DIM_100pin\R3

for design files & BOM.

Regards,
Gautam

0 AndriL over 7 years ago in reply to Gautam Iyer

Prodigy 60 points

Hi Gautam

Thank you for your advice. Unfortunately I'm not able to import the pcb Files into Altium. So I will draw the Edge Connector by myself.

Regards
Andri

0 Mark Labbato over 7 years ago in reply to AndriL

Guru 30330 points

Andri,

The board was created a while ago in ExpressPCB which is a free tool. Unfortunately there are not a lot of options for exporting to other EDA tools. Just wanted to give you this information. But I think your approach is really the best option.

-Mark

C2000™︎ microcontrollers

C2000 microcontrollers forum

PCB Design for DIMM 100 Edge Connector