• State Answer Suggested
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 83 subscribers
  • Views 590 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D: eQEP, Matlab,C2000

rangana marasinghe
Prodigy 135 points
Part Number: TMS320F28379D

I am using the F28379D board for my Project work. There I am using Matlab to generate code with the eQEP block. Though it is so, I am not getting any of the readings. so what should I do?  Is there any problem with my configuration? also is there any way to energize those modules? If could please give me a thorough explanation on this.

  • 0
    Guru 30330 points
    Rangana,

    You did not attach anything and your question is very vague, so we cannot possibly guess what your issue is.

    If you are using MATLAB/Simulink generated Code, you will likely find better support from the Matlab support forums.
    If you have specific questions of the C2000 MCU peripherals or software (not generated by Matlab) feel free to ask them here.

    -Mark
  • 0 in reply to Mark Labbato
    Guru 30330 points
    Rangana,

    As you have not replied here, I am going to assume that you were able to get support through the Matlab support forums. If you have questions about the eQEP module specifically, or more guidance on what you are trying to accomplish along with what you have tried, we might be able to assist.

    Thanks,
    Mark