• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 559 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280049: SFRA usage

Emma Wang
Expert 5410 points

Part Number: TMS320F280049
Other Parts Discussed in Thread: SFRA

Dear Champion

I want to know:

When using SFRA, do I need an emulator?

Or can I use only the USB to serial port?

I see this：

From this website

so I think I don't need a emulator.

B&R

Emma

  • 0
    TI__Mastermind 43730 points

    Emma,

    The SFRA GUI can initiate the sweep and log the data over SCI and hence JTAG is not necessary.

    Though typically on control cards we use the USB port that emulates a serial port plus JTAG. However you can disable the JTAG with a switch on the control card and use just the serial portion. It works. 

    regards

    Manish