What happened before procedure enters 0x3F7FF6 ?

Ronnie

Intellectual 750 points

In CMD documet, BEGIN is defined like this.

BEGIN : origin = 0x3F7FF6, length = 0x000002 /* Part of FLASHA. Used for "boot to Flash" bootloader mode. */

Before 0x3F7FF6, what happened?

Will peripheral registers be reset before 0x3F7FF6 or after 0x3F7FF6 ?

over 6 years ago

0 Krishna Allam over 6 years ago

TI__Expert 7985 points

Hi Ronnie,
Can you please provide more details about the target environment you are using and what you are trying to do, so that we can provide a better answer.
Regards,
Krishna

0 Krishna Allam over 6 years ago in reply to Krishna Allam

TI__Expert 7985 points

Hi Ronnie, Were you able to resolve your issue? Do you need any additional help from us? Thanks, Krishna

0 Krishna Allam over 6 years ago in reply to Krishna Allam

TI__Expert 7985 points

Hi Ronnie,

We are going to close this issue on the understanding that it is resolved. If that is not the case, please go ahead and re-open it.

Cheers!

Krishna

C2000™︎ microcontrollers

C2000 microcontrollers forum

What happened before procedure enters 0x3F7FF6 ?