F28M36P63C2: Porting PLC firmware 35 to 36

Pat,
There is no recommendation from TI to porting from the F28M35 to the F28M36. From a feature set POV there would not be any advantage of moving to the M36 as the G3-ARIB FW is delivered as a "black box" type model without the ability to change/add features like CPU speed, etc.

At this time there is no further developement ongoing within TI(either from a compliance or feature set) with these PLC eMETER communication platforms.

If there is interest on your end in gaining access to the source code via a SLA type model we can discuss more offline please let me know.

Best,
Matthew

THanks for your prompt reply, Matthew. I would like to pursue this further. I sent you an email.
Pat

Did you receive my email?

Pat,
Sorry, I didn't see the mail on my side. I'll send you one and see if we can get that to go through. :)

Matt