• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 260 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28335: can we monitor the result in MATLAB scope which are appearing in TMS pins in real-time!!!!

TMS320F28335: Generate enhanced Pulse Width Modulated (ePWM) waveforms.

kartikesh jha
Prodigy 40 points
Part Number: TMS320F28335

Can we see the results of (ePWM) in simulink using scope? 

  • 0
    Mastermind 6460 points

    Hi,

    No, we don't currently support this feature. The ePWM block are not simulation ready. They are meant to be used as driver block that will dump the code related to ePWM functionality in the generated code. We support external mode for signal logging and parameter tuning. But we don't support feature to view the ePWM block output in simulation which basically would mean to see the physical signal on the controller pin in digital scope.