CCS/TMS320F28035: Can communication

silpa JAYARAJ

Part Number: TMS320F28035
Other Parts Discussed in Thread: CONTROLSUITE,

Tool/software: Code Composer Studio

Hi,

I am using example ti\controlSUITE\device_support\f2803x\v130\DSP2803x_examples_ccsv5\ecan_back2back. I would like to transmit data from one Microcontroller(TMS320F28035) and receive the same data using another microcontroller(TMS320F28035).What all changes should i make to the example code inorder to achieve this.

regards,

Silpa

over 6 years ago

0 Krishna Allam over 6 years ago

TI__Expert 7985 points

Hi Silpa,
The loopback example you are looking at, is a good start. The back2back example configures the hardware in loopback mode. Please study the hardware configuration to understand what needs to be modified to disable the loopback. Now setup the example for transmit on one device and for receive on the second one. It is a simple exercise but you would have to refer to the TRM and understand these simple concepts related to CAN. Please let us know, if you need further assistance. Regards, Krishna

0 Krishna Allam over 6 years ago in reply to Krishna Allam

TI__Expert 7985 points

Hi Silpa,

Can you please advise if you were able resolve the issue?

Thanks,

Krishna

0 Krishna Allam over 6 years ago in reply to Krishna Allam

TI__Expert 7985 points

Hi Silpa, I will go ahead and close this with the understanding that you have been able to resolve your issue. Please re-open if that is not the case ...cheers! Krishna

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28035: Can communication