CCS/TMS320F28335: tms320f28335

ROHIT KUMAR71

Tool/software: Code Composer Studio

Sir,

I have interfaced TMS320F28335 with simulink(MATLAB). When i connect ePwm block in simulink, then it builds and works properly. But when i connect ADC to ePWM block, it builds and generates code but not getting PWM signal. Please help

over 7 years ago

0 Yanming Luo over 7 years ago

TI__Guru** 117080 points

Please refer to the following link to an example model on using the ePWM block to trig the ADC.
in.mathworks.com/.../adc-pwm-synchronization-via-adc-interrupt.html

And the following link to the Mathworks ePWM documentation page.
in.mathworks.com/.../c280xc2802xc2803xc2805xc2806xc2833xc2834xf28m3xf2807xf2837xdf2837xsf28004xepwm.html

You can also contact MathWorks Technical Support for more assistance on Simulink of Matlab.
www.mathworks.com/.../contact_us.html

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28335: tms320f28335