CCS/TMS320F28335: TMDSDOCK28335

Sandeep,

you have two options for this:

1. ".bit"
   1. Use this if you wish to write to a specific bit or set of bits that have been named for example the "CBD" set to "Force ePWMxA output high, EPwm1Regs.AQCTLA.bit.CBD=0x2.
2. ".all"
   1. Use this if you wish to write to the full register all at once. Again, for example, lets set the "CBD" bits equal to 2: EPwm1Regs.AQCTLA.all= 0x0800.
   2. Be careful when using .all because it can overwrite other bits in the register, its best to use a read, modify, write structure when using this.

Regards,
Cody