• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 1190 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F28027F: how to initialize the gpio pins?

Shivam Mittal
Prodigy 30 points

Part Number: TMS320F28027F

Tool/software: Code Composer Studio

command to activate clock, unlock gpio port, disable adc .

  • 0
    TI__Genius 17315 points
    Shivam,

    For information on getting started with the F28027 please see the following two workshops:

    processors.wiki.ti.com/.../C2000_Archived_Workshops

    processors.wiki.ti.com/.../C2000_Archived_Workshops

    The first workshop uses a controlSTICK, which has been discontinued - however, you should be able to run the lab exercises on a LaunchPad with some very minor modifications. The second workshop is for the F28035 - the F28027 is similar but does not have the CLA and a reduced memory map. This workshop could be modified for the LaunchPad, too. The reason I am including it is so you can learn more about the lab files that were used to create the F28027 workshop.

    I hope this helps. If this answers your question, please click the green "Verified Answer" button. Thanks.

    - Ken
  • 0 in reply to Ken Schachter
    TI__Genius 17315 points
    Shivam,

    It's been a while since I have heard from you last. Therefore, I am assuming you were able to resolve your issue. If this isn’t the case, please reject this resolution or reply to this thread. If this thread locks, please make a new thread describing the current status of your issue. Thank you.

    - Ken