CCS/TMS320F28379D: TMS320F28379D

sartajada2.0

Part Number: TMS320F28379D

Tool/software: Code Composer Studio

I´m using XDS100v2, conected to my board (TMS320F28379D), and CCS. Recently I have the follow message when I try to erase, program or debug

[ERROR] C28xx_CPU1: Error connecting to the target: (Error -1050 @ 0x0) Internal error: Invalid parameter passed to function. Restart the application. If error persists, please report the error. (Emulation package 8.0.903.6)

Any idea about what happends and how to solvent?

Many thanks,

over 6 years ago

0 Vamsi Gudivada over 6 years ago

TI__Guru* 87155 points

Hi,

If not erase/program, are you able to successfully connect to the device and load code to RAM and execute?

Thanks and regards,
Vamsi

0 sartajada2.0 over 6 years ago in reply to Vamsi Gudivada

Prodigy 40 points

Hi Vamsi

Thanks for your quick response. I tried to load in RAM but the error is the same.

Alberto.

0 Vamsi Gudivada over 6 years ago in reply to sartajada2.0

TI__Guru* 87155 points

Alberto,

Please see if this helps: https://e2e.ti.com/support/tools/ccs/f/81/t/289805?CCS-Debug-session-entered-but-useless-

If it does not help, I will ask our CCS experts to help you further. Let me know.

Thanks and regards,

Vamsi

0 MatthewPate over 6 years ago in reply to Vamsi Gudivada

TI__Guru* 82230 points

Alberto,
Wanted to check in to see if you were able to try out Vamsi's suggestion?

Best,
Matthew

0 sartajada2.0 over 6 years ago in reply to MatthewPate

Prodigy 40 points

Many thanks

Finally I have replaced the TMS320F28379D and Ok. Now it´s working again.

Alberto.

0 Vamsi Gudivada over 6 years ago in reply to sartajada2.0

TI__Guru* 87155 points

Alberto,

Thank you for the update.
It would be good to know more details about this if possible. I wonder if you programmed any DCSM settings that triggered this.

Thanks and regards,
Vamsi

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28379D: TMS320F28379D