LAUNCHXL-F28379D: DETERMINISTIC DELAY FUNCTION IMPLEMENTATION

Aristotelis Papatheodorou

Part Number: LAUNCHXL-F28379D
Other Parts Discussed in Thread: C2000WARE

Hello,

I would like to implement a deterministic delay function in order to send/receive data with spi in specific time intervals. How can I implement this using Delfino's timers?

Thank you in advance for your assistance.

over 7 years ago

0 Nirav Ginwala over 7 years ago

TI__Genius 15385 points

Hi,

You can configure the Timer interrupt based on your requirement, you can also look at C2000Ware example on how to configure timers. Once the timer expires it will generate Timer Interrupt, which will go to ISR as shown in the example. In the ISR you can toggle the GPIO for handshake between SPI and timer.

Regards,
Nirav

0 Aristotelis Papatheodorou over 7 years ago in reply to Nirav Ginwala

Prodigy 90 points

Hi Nirav,

Thank you for your quick response. I'll try it and I will keep you posted.

Regards,
Aristotelis

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: DETERMINISTIC DELAY FUNCTION IMPLEMENTATION