• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 554 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F280049C: SCI INTERRUPT - LOOPBACK MODE PROBLEM

Frozen
Intellectual 550 points
Part Number: LAUNCHXL-F280049C
Other Parts Discussed in Thread: C2000WARE

Hi.

I am trying to use loopback mode with interrupts at F280049C. But I couldn't find any example. Is there an example for that? At the driverlib (from C2000ware) I found example for other boards. But I couldnt make it work at my board. So if anyone can share example code it would be great.

  • 0
    TI__Genius 17315 points
    Frozen,

    Sorry, but an SCI interrupt loopback example for the F28004x is not available. However, you could use the SCI interrupt loopback example from the F2807x as a model to create an example for the F28004x . Since both example are based on Driverlib, this process should be relatively straight forward. The F2807x example can be found at:

    C:\ti\c2000\C2000Ware_<version>\driverlib\f2807x\examples\cpu1\sci\sci_ex2_loopback_interrupts.c

    Remember to use the Driverlib for the F28004x. Then copy and modify the source file (.c) from the F2807x.

    I hope this helps. If this answers your question, please click the green "Verified Answer" button. Thanks.

    - Ken