• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 81 subscribers
  • Views 602 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F28035: unable to program the dsp

silpa JAYARAJ
Intellectual 450 points

Part Number: TMS320F28035

Tool/software: Code Composer Studio

Hi all,

When I am trying to program my dsp , I am getting the following error:

Error connecting to the target:
(Error -1015 @ 0x0)
Device is not responding to the request. Device may be locked, or the debug probe connection may be unreliable. Unlock the device if possible (e.g. use wait in reset mode, and power-cycle the board). If error persists, confirm configuration and/or try more reliable JTAG settings (e.g. lower TCLK).
(Emulation package 8.0.903.4)

I have verified the J-TAG connection and its a success. Please  help me with this.

Regards,

Silpa