Thanks, Cody for replying
I understood how to synchronise two PWMs, but I want to know if is it possible with Embedded Coder in Simulink environment. I am not much into codings using CCS.
Thanks in advance
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thanks, Cody for replying
I understood how to synchronise two PWMs, but I want to know if is it possible with Embedded Coder in Simulink environment. I am not much into codings using CCS.
Thanks in advance
Mahetab,
I looked at some of there documentation here, but I do not see this feature mentioned.
This tool is fully supported by Mathworks, so this would be a good question for the Mathworks forum.
Regards,
Cody
Great thanks. If you get a chance please add a link here to the Forum thread to help others in the future.
Regards,
Cody