LAUNCHXL-F28069M: LAUNCHXL-F28069M - TMS320F28069 - XDS100V2

Hao Qin

Part Number: LAUNCHXL-F28069M

Hello All,

When I set a hardware connection using mini USB cable to connect LAUNCHXL-F28069M to my PC and flash to debug. I received an error message as below. Also I attach the screenshot of Device Manager of my PC about this TI debug probe

Best,

Hao

over 6 years ago

0 Hareesh Janakiraman over 6 years ago

TI__Guru* 95315 points

Please download this doc: http://www.ti.com/lit/an/spracf0/spracf0.pdf . It has all the information you need to debug connectivity issues.

0 Hao Qin over 6 years ago in reply to Hareesh Janakiraman

Intellectual 760 points

Hello Hareesh J,

Thank you for information. I follow this document to solve this issue. But the error message still shew up.

Hao

0 Brett Larimore over 6 years ago in reply to Hao Qin

TI__Guru 57255 points

Hi Hao,

Early in the debug guide that Hareesh referenced, it asks if the components/switches are set up for JTAG connection.

Is S1 position 3 on the LaunchPad in the ON position. It needs to be that way to connect the C2000 to the debugger (but isn't by default, so that the demo can be run).

If that doesn't help, there's a FAQ section on JTAG connectivity at the bottom of the LAUNCHXL-F28069M Overview document. It may be helpful.

Thank you,
Brett

0 MatthewPate over 6 years ago in reply to Brett Larimore

TI__Guru* 81560 points

Hao,

Wanted to check in to see if you had any progress with the suggestion from Brett above, or still needed assistance from TI.

Best,

Matthew

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28069M: LAUNCHXL-F28069M - TMS320F28069 - XDS100V2