This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
So i have been trying to achieve usb communication between PC and TMS320F28069M, I have been using the usb_bulk_device example provided in the C2000ware. When I plug in my usb to the pc the windows doesn't recognizes the device. I have already installed the driver given in the utilities folder(INF file).
While going through the INF file i found it had certain notes but ii really couldn't figure out what it meant, if someone can help me out with this it would be of great help.
Regards
Anurag
Hi Anurag,
Are you using the current C2000Ware Version.
Please check if it the latest version and use the drivers from there.
Regards
Harshmeet
Hi Harshmeet,
Yes Harshmeet I am using the latest C2000Ware version.
Can you let me know what all steps are needed on the software side.
Thanks and Regards
Anurag
Anurag,
Once you run the usb_bulk_device, you will get an unrecognized driver.
You need to go to the utilities/windows_drivers and install the driver from there.
Then you can go to the utilities/tools/usb_bulk_example Application and use it for data transfer.
Hope this helps.
Thanks and Regards
Harshmeet Singh
Harshmeet,
I did Install the driver but it still does not recognizes the USB device, it gives me an error Device descriptor Request failed.
Regards
Anurag
Hi Anurag,
I can check this at my end.
I will get back to you.
Regards
Harshmeet
Harshmeet,
Is there some resource I can go through meanwhile.
Thanks and Regards
Anurag