TMS320F28377S: How to use Flash API?

Hi 

Hope you have gone through F2837x Workshop at https://training.ti.com/c2000-f2837xd-microcontroller-1-day-workshop-series

Please refer 

API and Examples:

• Flash API documentation for a specific device: C2000Ware_<version>\libraries\flash_api\f2837xs\docs\
• Flash API example: C2000Ware_<version>\device_support\f2837xs\examples\cpu1\flash_programming
• Serial flash programmer examples: C2000Ware_<version>\utilities\flash_programmers
• Examples related to application code running in flash: C2000Ware_<version>\device_support\f2837xs\docs\

Application notes:

• Application note: Running an Application from Flash (spra958)
• Application note: Copying Compiler Sections from Flash to RAM on the TMS320F28xxx DSCs (spraau8)
• Application note: Serial Flash Programming of C2000™ Microcontrollers (sprabv4)

C2000 Flash FAQ http://processors.wiki.ti.com/index.php/C2000_Flash_FAQ

Let us know if you have any other specific question.

Thanks, Katta

Hi Non,

You can use CCS or UniFlash to load your .out to Flash memory.

However, if you want to embed Flash API in your application or if you want to develop your custom Flash programmer, you can use references provided by Katta.

Thanks and regards,

Vamsi

Hello, Thank you  Katta and Vamsi.

My idea is "Flash programming without USB-Debug-Probe" but I want to use CAN Bus to flash program from Debian OS.

I think i should Flash API right?

Thanks and regards,

Non.

From the picture above, This is my understanding. Is it right?

Thanks and regards,

Non.

Hi,

Rajaravi Krishna Katta said:

Hi,

Please refer 

• Application note: Serial Flash Programming of C2000™ Microcontrollers (sprabv4)

It will help in understanding a similar framework.

Thanks, Katta

Thank you Katta. I'm understood serial flash programming. And I have some question : Can I access to sci boot mode at the run-time(by coding)? when boot pin mode is emulation boot. I mean, I will send command to select to flash mode.

Thanks, Non