Compiler/F28M36P63C2: Uniflash Hanging when trying to program Device

Calex36

Intellectual 2405 points

Part Number: F28M36P63C2
Other Parts Discussed in Thread: UNIFLASH

Tool/software: TI C/C++ Compiler

Running into some issues whilst programming F28M36P63C2ZWTT.

Using Uniflash v5 with a BHUSB200 JTAG Emulator on a windows 7 pc.

When programming the device Uniflash hangs, showing "Initialization completed".

Any Thoughts on this, should I be using a different emulator or version of uniflash?

over 6 years ago

0 Vamsi Gudivada over 6 years ago

TI__Guru* 87155 points

Calex,

UniFlashV5 is fine for this device.

Can you try TIXDS200 and if that works?

Is this your custom board or a TI CC?

Did you try programming via CCS?

Thanks and regards,
Vamsi

0 Vamsi Gudivada over 6 years ago in reply to Vamsi Gudivada

TI__Guru* 87155 points

Calex,

Are you able to program fine now?

Thanks and regards,
Vamsi

0 Vamsi Gudivada over 6 years ago in reply to Vamsi Gudivada

TI__Guru* 87155 points

Calex,

Since I did not hear from you, I am assuming that you are able to program fine now. I am closing this post.

If you still have a question on this, you can reply to this post. If the post gets locked, you can click on the "Ask a Related question" button at the top right corner of this page and post your question.

Thanks and regards,
Vamsi

C2000™︎ microcontrollers

C2000 microcontrollers forum

Compiler/F28M36P63C2: Uniflash Hanging when trying to program Device