TMS320F28027F: Instaspin Lab 11e (Hall sensor start-up with transition to FAST) question

Johnny Shih

Intellectual 535 points

Part Number: TMS320F28027F
Other Parts Discussed in Thread: DRV8312

Dear TI team,

As we know it only F2806xF and Boost8301 or Boost8305 support Instaspin Lab 11e,

May I modify code and change to use F28027F for this LAB11e ?

over 6 years ago

0 Yanming Luo over 6 years ago

TI__Guru** 117210 points

Yes, the project can support F2802xF also if there are separate GPIOs for three hall signals as F2806xF. We didn't provide such lab for F2802x since there is no GPIOs and interface for hall sensor on F2802x launchPad.

0 Johnny Shih over 6 years ago in reply to Yanming Luo

Intellectual 535 points

Dear Yanming,

Thanks a lot for your reply,

OK, I will study Lab11e and try to test this function in F28027F.

0 Johnny Shih over 6 years ago in reply to Yanming Luo

Intellectual 535 points

Dear Yanming,

Why TI didn't use F28027F & DRV8312 EVM for Lab11e?

It have Hall sensor GPIO for F28027.

0 Yanming Luo over 6 years ago in reply to Johnny Shih

TI__Guru** 117210 points

Sorry. It just shows the algorithm for C2000 controller on some labs, so not all EVM-Kits are supported limit to the resource.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28027F: Instaspin Lab 11e (Hall sensor start-up with transition to FAST) question