• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 482 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28379D: Does F28379D supports Simultaneous sampling mode?

Sharat Yadav
Expert 1015 points

Part Number: LAUNCHXL-F28379D

With comparision to adc on LaunchXL-F28069M, I am unable to understand the difference (if on hardware) for simultaneous sampling mode on LaunchXL-F28379D. As the Tech Ref Manaul attached as hyperlink has different operation for the adc's in simultaneous operation mode.

  • 0
    TI__Mastermind 43920 points

    Hi Sharat,

    F28069 has one ADC module but will allow 2 SOCS (even following odd-numbered SOC using SIMULEN0 enable bit) to be assigned different channels with same trigger source.  Once the trigger event occurs, both SOCs will simultaneously sample the two different channels.  F28379 has 4 independent ADC modules.  You can assign any SOC to any ADC channel per module and use the same trigger source for each ADC module, once the trigger occurs, all configured ADC modules will convert simultaneously and does not have same even and odd SOC requirement as F28069.

    Regards,

    Joseph