TMS320F280049: ECAPs and APWMs

Hitoshi Sugawara

Mastermind 20470 points

Hi Champs,

Is it possible to utilize 7 ECAP inputs and 7 APWM outputs concurrently?
For example, Are ECAP 1 to 7 configured by INPUT_XBAR and APWM 1 to 7 configured by OUT_XBAR?

Thank you for your check.
Best regards,
Hitoshi

over 6 years ago

0 MEGHANA MANAVAZHI over 6 years ago

TI__Genius 10345 points

hi ,

i believe that the APWM you are referring to are the ECAPxOUT ..

The input XBAR and Output XBAR are mutually exclusive .

The INPUT xbar can configure the 7 ECAP inputs and the output XBAR can configure the 7 ECAP1OUT in parallel .

If the peripherals support getting signals in and out the XBAR would not be a bottleneck.

The Tables in the XBAR TRM chapters would give details on the signal connections

Regards.

0 Hitoshi Sugawara over 6 years ago in reply to MEGHANA MANAVAZHI

TI__Mastermind 20470 points

Thank you so much for your prompt reply.
I understood about the module configuration.

Best regards,
HItoshi

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280049: ECAPs and APWMs