Real time data exchange

SADIK OZDEMIR

Other Parts Discussed in Thread: TMS320F2812

Hi. I developed a buck converter in SIMULINK and I want to control ( PI control ) it by using TMS320F2812 DSP cart. How can I use the "RTDX from and RTDX to" SIMULINK blocks for this purpose. Thanks in advance..

over 15 years ago

0 ChrisClearman over 15 years ago

TI__Guru** 119680 points

Sadik,

This question is better answered by Mathworks (although many on this forum use this tool as well, so hopefully you will get a response). I recommend you send this post to

c2000_expert@mathworks.com

0 Lori Heustess over 15 years ago in reply to ChrisClearman

TI__Guru* 93800 points

Sadik,

You can try this link as a start:

http://www.mathworks.com/matlabcentral/fileexchange/12201-code-verification-using-rtdx .

-Lori

0 SADIK OZDEMIR over 15 years ago in reply to Lori Heustess

Prodigy 20 points

I had downloaded the work before but I have not investigate it deeply yet. As soon as possible, I will work on it. Thanks for yor answer.

C2000™︎ microcontrollers

C2000 microcontrollers forum

Real time data exchange