• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28379D: TMS320F28379D

CCS/TMS320F28379D: TMS320F28379D

robin gangopadhya18
Mastermind 6326 points

Part Number: TMS320F28379D

Tool/software: Code Composer Studio

Can someone point out how to fix the "path entry" problem  I am getting while running 1-day  workshop of F2837xD  lab1: CPU1 not in CPU2 of course.

I am stuck...invalid_path.pdf

very much appreciate...

robin

  • 0
    Mastermind 6326 points

    Ignore the last posting. pl

    I had to delete the  workshop install which I  was not sure would be useful.

    But somehow, reinstalling brought up the " use default path" box which when checked out allows you to enter the correct path.

    I suspect there is a bug somewhere: this time I had not carried out the "target configuration". On first config, there was no box to uncheck which resulted in unavailable path.

    This came up when I tried to build. Which I did .

    No errors this time of "invalid path"...

    -So now just following the recipe like clicks & double clicks...see where we land.

    robin

  • 0 in reply to robin gangopadhya18
    TI__Expert 6795 points

    Thanks for letting us know.