This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi all,
We are going to gerber out this project.
Since this is our first digital power project, that would be very helpful for us if C2000 team could
review our layout and check if we miss anything or give any suggestions.
Thanks,
Kevin,
let me check on this and get back to you, this is in general out of scope of what we can provide on e2e.
-Manish
Kevin,
We have the following documents that list general principles and best practises that you can follow for power side.
I am unable to provide a one-on one review because that will be engineering consulting which is outside the scope that I can offer here.
http://www.ti.com/lit/an/snva021c/snva021c.pdf
http://www.ti.com/lit/an/snva721a/snva721a.pdf
I am waiting to see if we have something specific to C2000 MCU that i can point to you.
-Manish
Hi Manish,
Thanks for your reply.
We will check these two documents first and wait for your further information.
Thanks,