This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSDOCK28379D: Nothing received from GPIO pins of TMDSDOCK28379D....

Part Number: TMDSDOCK28379D
Other Parts Discussed in Thread: CONTROLSUITE


I am using TMDSDOCK28379D (F28379D Delfino Experimenter Kit with HSEC180 docking station) and trying to drive a motor with my power electronic circuit. I am using two USB cables. One supplies the control cards while the other supplies docking station. I am able to run the MCU with Matlab 2019a or Matlab 2019b.  I am using 68,70 and 74 pins of  HSEC180 to send encoder signals to the Simulink.  Inside the Simulink, I can  generate proper gate signals. Finally,  I am using GPIO DO blocks  to send the signals to the  HSEC180 pins.  Although I can send signals to the Simulink via HSEC180, I have never received  Simulink signals from HSEC180 pins. I have followed pin map in the file named '180_HSEC8_DV_pinout_R1_1' in the following address:


Do you think my HSEC180 docking station has problem?  Do I need to make any switch settings on the MCU? Could you please help me about that?

Thank you