Recommend device for my works

Junhyeok Kim

Other Parts Discussed in Thread: TMS320F28379D, TMDSDOCK28379D, CONTROLSUITE, C2000WARE

Dear Manager,

I'm now working on DSP and I need 16-bit ADC(Analog Input) at least 2 ports, and 12 or 16-bit DAC(Analog Output) at least 2 ports.

I used the TMS320F28379d LaunchPad XL but it is not enough.

Could you recommend your development kit which can satisfy my condition?

over 6 years ago

0 Rex Chang over 6 years ago

TI__Guru 50170 points

Hi, Junhyeok,

Please refer to the following e2e thread on similar questions.

https://e2e.ti.com/support/processors/f/791/t/871919

You can ignore the other ADS8588 device, but focus on the questions asked by Tom. You will need to consider other parameters and requirements. See if the discussion in the other thread helps you in making your decision.

I additioin to K2H, there are devices in Sitara family which you may want to explore. One of the example using AM335 PRU can be found in

http://www.ti.com/lit/ug/tidudn4a/tidudn4a.pdf

Rex

0 Brett Larimore over 6 years ago in reply to Rex Chang

TI__Guru 57255 points

Hi Junhyeok,

If your concern is that the F28379D LaunchPad does not provide enough signals to do a proper evaluation with the F28379D device, the TMDSDOCK28379D controlCARD kit provides access to more of the pins & signals of the F28379D device.

The schematics for the controlCARD are available in C2000Ware (or controlSUITE). You can review them and see if they meet your need prior to ordering.

Thank you,
Brett

C2000™︎ microcontrollers

C2000 microcontrollers forum

Recommend device for my works