In order to connect our power board with the TMS320F28379D controller card, we need the card-edge finger signals & pitch or the mating connector.
Pl see attached which one we are talking about.
Any help will be highly appreciated.
robin
Robin,
There are two mating connectors. The nearest pins are 21mm on center.(see diagram below)
The mating connectors can be found in TMDSCNCDHSEC's BOM and are: HSEC8-130-01-L-DV-A & HSEC8-160-01-L-DV-A-BL
Please look at the schematics for the signal connections. They can be found in C2000Ware here: "C:\ti\c2000\C2000Ware_2_01_00_00\boards\controlCARDs\TMDSCNCD28379D\R1_3\F2837x_180controlCARD_R1_3_SCH_02Oct2015.pdf"
Warm Regards,
Cody
