TMS320F280041C: debugger

Viktorija Cecil

Mastermind 18501 points

Part Number: TMS320F280041C
Other Parts Discussed in Thread: C2000WARE

Team,

Can Blackhawk BH-USB-2000 debugger be used to debug F280041CPMS MCU?

If not, can debugger on F280049C launchpad be used? What pins on F280041CPMS micro are used for debugging?

Thanks

Viktorija

over 6 years ago

0 Nirav Ginwala over 6 years ago

TI__Genius 15385 points

Hi Viktorija,

Are you using CCS to connect? If yes, which version?

Regards,

Nirav

0 Viktorija Cecil over 6 years ago in reply to Nirav Ginwala

TI__Mastermind 18501 points

Yes, Version: 9.2.0.00013

0 Nirav Ginwala over 6 years ago in reply to Viktorija Cecil

TI__Genius 15385 points

Hi Viktorija,

Sorry for not getting back on this one, is this issue resolved? If so, can you please close this thread?

Thanks,

Nirav

0 Viktorija Cecil over 6 years ago in reply to Nirav Ginwala

TI__Mastermind 18501 points

Nirav, this is still an open question.

0 Nirav Ginwala over 6 years ago in reply to Viktorija Cecil

TI__Genius 15385 points

Hi Viktorija,

Blackhawk is not supported for F280041CPMS in latest C2000Ware release.

Yes, you can use F280049C launchpad debugger to connect to F280041CPMS using CJTAG. You can refer to the board schematic of the launchpad, and the CJTAG section of the TRM/Datasheet.

Regards,

Nirav

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280041C: debugger